Top 10 eero mesh Holder – Whole Home & Mesh Wi-Fi Systems

As an Amazon Associate I earn from qualifying purchases.

1. Tizomi

#ad

No Messy Wires | Space Saving | Easily Be Moved Outlet Mount Holder for eero 6 Extender 1 Pack, Outlet Wall Mount ONLY for eero 6 Dual-Band mesh Wi-Fi 6 System NOT Fit for eero Pro 6

#ad
Tizomi #ad - Without messy wires any more, saving space while maintaining beauty. Installation without toolsno holes or screws in installation means no harm to your wall and no need extra tools. Feel free to contact us for any questions or problems.

Easy to moveall messy wires are hided on the back of the eero 6 mesh plug mount, you can plug in your eero wifi router to any electrical outlets in your home and can easily be moved from room to room, making the setup of network much more simple. Upgraded versionthis outlet wall mount is specially designed for eero 6 mesh wifi system, NOT fit for the eero Pro 6 or eero mesh.

We will provide you a satisfied service. Looks neat and tidy with this outlet mount for eero 6 mesh wifi system. Note: eero 6 router and plug are NOT included. Worry-free guaranteethanks for choosing tizomi mall. Fantastic cords managementyou can wrap the cord and hide them around the groove in the back of the eero 6 wall mount. Please confirm your eero device before purchase.
BrandTizomi #ad
ManufacturerTizomi #ad
Part Numbererp601

2. BRAINWAVZ

#ad

Tilted for Max Reception, No Mess, White by Brainwavz, No Tools, Screwless Wall Mount for Eero Mesh WiFi Holder, Strong VHB Adhesive, Custom Design NOT Compatible with Eero 6/Pro 6/Beacon

#ad
BRAINWAVZ #ad - Ideal for environments with a lot of obstruction i. E. Desgined for range not interruption: our wall mount has been designed to not impede the wifi signal of your Eero. Strong bond: we only use the best and strongest VHB tape made by 3M, hard to pull off by hand when fully bonded.

Vhb tape is super strong and is very hard to pull off by hand when fully bonded, but can be easily removed with use of a hair dryer. No tools, no hassle: don’t look for that drill or call your buddy over to make swiss cheese of your walls, simply remove the tape backing and apply our mount to your desired location, wait at least 2 – 12hrs for the VHB to reach max bond strength and you’re good to go. Office cubicles, allows for better reception and range than just being left on a desk.

Not compatible with eero 6/Pro 6/Pro/Beacon. Wall mount for better wifi: get the most from our eero mesh wiFi system by placing it higher up on your wall for maximum range and reception. When left on tables, the low level doesn’t provide for the ideal situation for your Eero to reach its full potential. Original design: the only wall mount holder kit for the eero mesh Wifi system that turns it into a beacon, bathing your home of office in WiFi.
BrandBRAINWAVZ #ad
ManufacturerBRAINWAVZ #ad
Part NumberBWAVZ-EERO-WM02-WHT-BAR
ModelBWAVZ-EERO-WM02-WHT-BAR

3. BRAINWAVZ

#ad

Easy to Install, No Drilling, White by Brainwavz, VHB Stick On Holder, Screwless Wall Mount for Eero Mesh WiFi NOT Compatible with Eero 6/Pro 6/Beacon, No Mess, No Tools, Strong Adhesive Mount

#ad
BRAINWAVZ #ad - Designed for range not interruption: Our wall mount has been designed to not impede the wifi signal of your Eero. Vhb tape is super strong and is very hard to pull off by hand when fully bonded, but can be easily removed with use of a hair dryer.

Not compatible with eero 6/Pro 6/Pro/Beacon. Wall mount for better wifi: get the most from our eero mesh wiFi system by placing it higher up on your wall for maximum range and reception. When left on tables, the low level doesn’t provide for the ideal situation for your Eero to reach its full potential. Custom designed: our cradle design has been custom made to the curvature of the Eero body shape, holding it firmly but with minimal footprint.

Will look in any setting in your home or office. No tools, no hassle: don’t look for that drill or call your buddy over to make swiss cheese of your walls, simply remove the tape backing and apply our mount to your desired location, wait at least 2 – 12hrs for the VHB to reach max bond strength and you’re good to go.
BrandBRAINWAVZ #ad
ManufacturerBRAINWAVZ #ad
Part NumberBWAVZ-EERO-WM02-WHT-BAR
ModelBWAVZ-EERO-WM02-WHT-BAR

4. Tizomi

#ad

Outlet Wall Mount ONLY for eero 6 Dual-Band mesh Wi-Fi 6 System NOT Fit for eero Pro 6, No Messy Wires | Space Saving | Easily Be Moved Outlet Mount Holder for eero 6 Extender3 Pack

#ad
Tizomi #ad - Installation without toolsno holes or screws in installation means no harm to your wall and no need extra tools. Looks neat and tidy with this outlet mount for eero 6 mesh wifi system. Fantastic cords managementyou can wrap the cord and hide them around the groove in the back of the eero 6 wall mount.

Feel free to contact us for any questions or problems. We will provide you a satisfied service. Note: eero 6 router and plug are NOT included. Easy to moveall messy wires are hided on the back of the eero 6 mesh plug mount, you can plug in your eero wifi router to any electrical outlets in your home and can easily be moved from room to room, making the setup of network much more simple.

Without messy wires any more, saving space while maintaining beauty. Please confirm your eero device before purchase. Upgraded versionthis outlet wall mount is specially designed for eero 6 mesh wifi 6 system, NOT fit for the eero Pro 6 or eero mesh. Worry-free guaranteethanks for choosing tizomi mall.
BrandTizomi #ad
ManufacturerTizomi #ad
Part Numbererp603

5. COOLWUFAN

#ad

COOLWUFAN Wall Mount Holder for eero Pro 6 Home WiFi System-Simple and Sturdy Wall Mount Holder Stand Bracket for eero Pro 6 tri-Band mesh Wi-Fi 6 System, Without Messy Wires White3 Pack

#ad
COOLWUFAN #ad - Great decoration for living room, study, Bedroom, Colors and design elements of eero pro 6 WiFi shell, and ALL other rooms. Ideal for eero pro 6 routerwall mount holder for eero pro 6 home wifi, This wall mount is specially designed for eero pro 6 Home WiFi System.

Eero router is not included. No need any tools and finish in 5 minutes. Sturdy and easy to install, Very suitable for eeo WiFi router. Not fit for eero 6 or eero pro or eero Pro mesh and eero Beacon. Looks clean and classic with your eero Wifi. Easy to move mount the eero pro 6 wifi system on the holder, anytime, as long as there is a socket. Simple design perfect cord managementthis mount for eero pro 6 wifi system uses, The eero wall mount is designed with cord slot on, The cord groove allows simple storage of excess cable, Make your eero wifi look clean and tidy.

Make the setup of your network so much easier, Anywhere, You can mount your eero device to any electrical outlet and move it from room to room, Enjoy reliable wifi at home. Solid plastic - clean appearancethe same with material, this mount does not have any unnecessary embellishments. Install without screws put the eero pro 6 wifi on the wall mount bracket, The adapter into the holder head, Then take the cord into back groove.
BrandCOOLWUFAN #ad
ManufacturerCOOLWUFAN #ad

6. Mount Genie

#ad

The Eero Genie for New eero 6 and Mesh Wi-Fi: Wall Mount Outlet Holder Stand | Lowest Profile | Open Access | Multiple Install Options | Horizontal Outlets | Design Winner! 1-Pack

#ad
Mount Genie #ad - Our custom eero approved silicone band attaches the Eero to the Eero Genie allowing the cable access to face up, down, left or right for the easiest access, and prevents interference.

The eero genie is designed to fit both the new eero 6 and the 2020 eero mesh Wi-Fi systems perfectly! It also works with both adapters that ship with the eero 15W and 24W. Have both? buy a 3 pack and keep the same look throughout the house. Our mount uses the cord that comes with your Eero and wraps it neatly around our patented “Cord Groove Organizer”. Can easily be moved from room to room, unlike all the other mounts on the market which require permanent placement. The eero genie is the only mount that works on VERTICAL AND HORIZONTAL outlets making tight spots accessible.
BrandMount Genie #ad
ManufacturerMount Genie #ad

7. STANSTAR

#ad

Space Saving, Sturdy Outlet Brackets Holder, Cord Management for Eero 6 Router Without Messy Wires and Screws 2Pack, STANSTAR Wall Mount for Eero 6 Dual-Band Mesh Wi-Fi 6 Router

#ad
STANSTAR #ad - Easy to use-- no need other tools and installation accessories, you can easily install this practical wall mount to your Eero 6 Wifi 6 System. Better wifi signal and convenient--provides a better wifi placement for your Eero wifi 6, get the better wifi signal, and easy to move from room to room, make your life more convenient and comfortable.

Tailored size--this wall holder fits the eero 6 dual-band mesh Wi-Fi 6 system perfectly and sturdy to keep the Eero 6 router. Please note--this item is only fit the eero 6, not compatible with eero 6 pro、 eero mesh wifi 、eero pro wifi. Cord management--wrap the messy cord through the reels which are back of the eero 6 wifi wall mount, and hide the wires well. No messy wires, keep your home clean and safer. No screws, and won't hurt your wall absolutely.
BrandSTANSTAR #ad
ManufacturerSTANSTAR #ad

8. OkeMeeo

#ad

Wall Mount for eero Pro, Outlet Holder Bracket for eero Pro Home WiFi System Router, Enlarging Coverage No Messy Cord 3 Pack

#ad
OkeMeeo #ad - 365 day support & 7/24 servicefeel free to contact us for any question or problem. Mount for eero prodesigned for eero pro wifi sytem RouterNot for Beacon or New eero mesh WiFi with 3.

86in * 2. 36in dimension, eero Wifi is not included. Removable, no wall damageno need to drill a hole on the wall. Improve signal receptionConnect eero to any electrical outlet for easy setup of your network and better signal. Easily move eero from one place to another. Cord organized, perfect UnityOrganize excess cable at groove behind mount, simple design looks neat and classic. Thank you for choosing OkeMeeo.
BrandOkeMeeo #ad
ManufacturerOkeMeeo #ad
Part Number103-eero-3ZB
Model103-eero-3ZB

9. OkeMeeo

#ad

2 Pack, Screwless VHB Holder for Mounting eero Mesh WiFi Without Drilling Strongly Adhesive, Wall Mount for eero Mesh WiFi

#ad
OkeMeeo #ad - Feel free to contact us for any question. No wall damage, no hassleno need to drill a hole. Better wifi receptionmount eero mesh anywhere near and high for easy setup of network and better signal.

Clutter free, perfect UnityCable can be plugged beneath the mount, simple design looks neat and clean. No need to worry about water splashing compared to putting it on desktop. For eero mesh only, not for eero wifi 6, Please attach it to vertical surfaces for 24 hours before putting devices on it. 365 day support & 7/24 servicethis adhesive holder for eero mesh is solid built. Thank you for choosing OkeMeeo.
BrandOkeMeeo #ad
ManufacturerOkeMeeo #ad
Part Number300-eero-J2ZB
Model300-eero-J2ZB

10. HOLACA

#ad

Strong VHB Adhesive Mount by HOLACA 2 Pack, No Tools Required, Screwless Wall Mount for eero 6 Dual-Band mesh Wi-Fi 6 Router Holder, Easy to Install, No Drilling

#ad
HOLACA #ad - Install within minutes: just remove the tape backing, find the ideal place for the holder in your home, affix into place and wait at least 2hrs and upto 24hrs for the VHB tape to reach its max bonding strength and you are good to go.

No drilling, no screws, absaloutly no mess. Important: not recommended for use on plastered or wall papered walls. No tools required & no mess: fast, using super strong vhb mounting tape made by 3M, easy and no mess, that's why eero 6 wall mount differs from the rest, the holder can remain in place securely and for years and can't easily be yanked out. Wall mount for eero 6 dual-band mesh wi-fi 6 router : don't limit the range of eero 6, mount it, place it up high so that getting optimal signal from all of your devices. Our holder is easy to mount and install. Work with: eero 6 dual-band mesh Wi-Fi 6 router, NOT for eero 6 pro and eero mesh.
BrandHOLACA #ad
ManufacturerHOLACA #ad