Top 10 I2C OLED Display – Tablet LCD Displays

As an Amazon Associate I earn from qualifying purchases.

1. Frienda

#ad

5 Pieces I2C Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V

#ad
Frienda #ad - More details: use compatible with arduino, esp8266, stm32, esp32, etc.3. 35v power; operating temperature: -40 - 85 ℃; Resolution: 128 x 32. Product manual: as shown in the instructions.

Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, STM32, ESP32, also compatitable for ESP8266, compatitable with Arduino, etc. Power-saving display: the i2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC I2C communications simplifies connections; Please note that these I2C OLED display module comes without pin headers. What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-d'Affichage-02

2. IZOKEE

#ad

IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 4 Pin for Arduino Raspberry Pi Pack of 3pcs, White-IIC

#ad
IZOKEE #ad - 096" ssd1306 128x64 oled lcd display with iic/i2C Interface-4PIN. Due to the high resolution of 128 x 64 pixels, stm32 / 2, the display offers a lot of space to display elements! Easy connection of the display with arduino, raspberry pi, 51 Series, csr iC, MSP430 Series, etc.

Please note: the outer dimensions of White and Blue Display are slightly smaller than the Yellow-Blue Display. Only through I2C interface via four pins!128x64 pixel: please comment the default display type #define ssd1306_128_32 and uncomment #define SSD1306_128_64 at line 73 and 74 of the driver header file Adafruit_SSD1306. H. Then the 128x64 pixel can be displayed normally.
BrandIZOKEE #ad
ManufacturerIZOKEE #ad
Weight45 Grams
Part NumberIZKE31-IIC-WH-3
ModelIZKE31-IIC-WH-3

3. UCTRONICS

#ad

UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI

#ad
UCTRONICS #ad - Needn't backlight, the display unit can self-luminous. Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects.

It supports many chips: arduino UNO and Mega, Raspberry pi, STIM 32, etc.51 mcu, the uno shown in the picture is NOT INCLUDE. Resolution: 128 x 64, support voltage: 3. 3v-5v dc, view angle: > 160°, Power consumption: 004w during normal operation, full screen lit 008w. Embedded driver ic: ssd1306. It has super high contrast, bright and crisp dots, even tiny fonts quite readable. We offer technical support and software library as well as the guide book in the package. No embedded fonts inside the oled controller, user can create the fonts through the font generation software. Communication: i2c/iic Interface, only need two I / O ports.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Height0.39 Inches
Length1.18 Inches
Weight0 Pounds
Width1.18 Inches
Part NumberU602602
ModelU602602

4. WayinTop

#ad

WayinTop 3PCS 0.91 inch OLED Display Module IIC SSD1306 128x32 OLED Screen Driver DC 3.3V~5V for Arduino ESP32 ESP8266 AVR PIC STM32 Raspberry pi White

#ad
WayinTop #ad - High resolution high resolution oled for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output. Specificationoled display, no need backlight, self-illumination, 3.3v-5v power; resolution: 128 x 32. Widely applicationit's great for such as pic, AVR, arduino ESP32 ESP8266, ARM and Raspberry Pi. Etc. High performancethe display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver, also lower consumption; IIC I2C communications simplifies connections.
BrandWayinTop #ad
ManufacturerWayinTop #ad
Height0.2 Inches
Length3.94 Inches
Width3.94 Inches
Part NumberFC#WYTP61-WH-3

5. MakerFocus

#ad

MakerFocus 4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White with Du-pont Wire 40-Pin Female to Female for Arduino UNO R3 STM

#ad
MakerFocus #ad - 40pcs du-pont wires: 20cm/7. 87 inch, 2. 54mm 1p-1p pin head. Document link: https://drive. Google. Com/open?id=1qkexpet5muicaargotlnqk4f-jekkrhz; new version: gND pins are arranged in the first place instead of VCC, and the pins are already soldered and do not need to be soldered by yourself! High quality, low price, 40pcs dupon wires are free.

They can be used for PCB project, pc motherboard. The iic address can be changed, stim32 / 2, it is convenient to use with different machines. It is oled display without backlight and it is low power dissipation. The thickness of galss is only 1. 4mm. Driver ic: ssd1306; supported platforms: for arduino, MSP430 series, 51 series, SCR chips.

The male ends meant for insertion into standard 01"2. 54mm female sockets and the female ends are meant for insertion into standard 01"2. 54mm male headers. I2c iic serial oled lcd led blue display module: interface: vcc: 3. 3-5v; gnd: ground; scl: serial clock; sda: serial Data; viewing angle: greater than 160 degrees; Working temperature: -30-80 degrees.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height0.39 Inches
Length1.14 Inches
Weight0.06 Pounds
Width1.06 Inches
Part NumberSBSBSBSB-HAHAH

6. HiLetgo

#ad

HiLetgo 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32

#ad
HiLetgo #ad - The iic address can be changed, it is convenient to use with different machines. Four square holes are easy to install. Supports many control chip : fully compatible with Arduino 51 series, msp430 series, stm32/2 CSR IC etc. Ultra-low power consumption: full screen lit 008w. Driver ic: ssh1106. Resolution: 128*64.
BrandHiLetgo #ad
ManufacturerHiLetgo® #ad
Part Number3-01-1261

7. HiLetgo

#ad

HiLetgo 0.96" I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color White

#ad
HiLetgo #ad - Panel size: 26. 70mm x 19. 26mm x 1. 85mm. Font color: White. Drive duty: 1/64 Duty. High resolution: 128 * 64. 096" ssd1306 128x64 oled lcd display with i2c IIC SPI Serial.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-1234-IIC-W

8. Frienda

#ad

Frienda 5 Piece 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C IIC Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI

#ad
Frienda #ad - About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software. Embedded driver ic: ssd1306; communication: i2c/iic interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi.

Applications: 096 inch oled module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, 51 MCU, Raspberry pi, STIM 32, etc. Self-luminous: needn't backlight, the display can self-luminous; It has high contrast, bright and crisp dots, even tiny fonts quite readable. Resolution: 128 x 64; view angle: more than 160 degree; support voltage: 3. 3v-5v dc; power consumption: 004w during normal operation, full screen lit 008w.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-OLED-273jane

9. N / A

#ad

N / A 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module 128X32 Screen Driver DC 3.3V~5V for Arduino White

#ad
N / A #ad - 2pcs i2c oled display module 091 inch i2c ssd1306 oled display module white I2C OLED Screen Driver DC 3. 3v~5v for Arduino. The display performance is better than the traditional LCD display, also lower consumption. Plz note: these i2c olED Display Modules come without pin headers. Ssd 1306 oled display; i2c oled display, IIC I2C communications simplifies connections;. Use with arduino, esp8266, esp32, stm32, etc; 3.35v power; operating temperature:-40 - 85 ℃. 128x32 oled display, no need backlight, self-illumination, Display Color: White.
BrandN / A #ad
ManufacturerN / A #ad
Height0.59 Inches
Length4.72 Inches
Width6.3 Inches
Part Number0.91128x32

10. waveshare

#ad

Waveshare 1.5inch OLED Display Module 128x128 Pixels 16-bit Grey Level with Embedded Controller Communicating via SPI or I2C Interface.

#ad
waveshare #ad - This is a general oled display module, 1. 5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface. Supports spi or i2C interface, configured via onboard resistor. 16 gray scale, better display effect. 128x128 high resolution. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/STM32.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height3.54 Inches
Length7.09 Inches
Weight0.04 Pounds
Width3.94 Inches
Part Number1.5inch OLED Module
Model1.5inch OLED Module