Top 10 RFID Reader Arduino – Computer Internal Components

As an Amazon Associate I earn from qualifying purchases.

1. SunFounder

#ad

SunFounder RFID Kit Mifare RC522 RFID Reader Module with S50 White Card and Key Ring for Arduino Raspberry Pi

#ad
SunFounder #ad - Easy to use, with pin header. The module can be directly loaded into the various reader molds. Power voltage : 3. 3v, operating frequency: 13. 56mhz. Module interface: spi, Data transfer rate: Maximum 10Mbit/s. Applicable for the user who need to design or manufacture the RF card terminal. The rf ic card module design the circuit of card read by using the original Philips MFRC522 chip.
BrandSunFounder #ad
ManufacturerSunFounder #ad
Part NumberMifare RC522 RFID Reader Module
ModelNA

2. IZOKEE

#ad

IZOKEE Card Reader Module for RFID RC522 with S50 13.56MHz Smart Card Chip Key Ring for Arduino for Raspberry Pi 1 Set

#ad
IZOKEE #ad - This card reader module is based on the mf522-AN board and is delivered together with an S50 card, 6 blue key Ring and two matching pin strips. It is compatible with Arduino, Raspberry Pi and micro-controller.

The module uses a voltage of 3. 3v. It is compatible with mifare1 s50, mifare1 s70, mifare Pro, MIFARE Ultralight, and MIFARE DESFire. It can be connected communication with user's any CPU main-board through several lines of SPI interface; it can ensure stable and reliable work, and reader distance. It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording. This module can be directly loaded into the various reader molds.
BrandIZOKEE #ad
ManufacturerIZOKEE #ad
Height0.2 Inches
Length4.72 Inches
Weight0.12 Pounds
Width3.15 Inches
Part NumberIZKE30-1
ModelIZKE30-1

3. Qunqi

#ad

Qunqi 5Pcs RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring for Arduino Raspberry Pi

#ad
Qunqi #ad - Power voltage : 3. 3v, operating frequency: 13. 56mhz. Sleep current: 80ua, peak current: 30mA, Data Transfer Rate: Max. Supported card types: mifare1 s50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire. Current :13-26ma / dc 3. 3v, idle current :10-13mA / DC 3. 3v. Read range: 0 ~ 60mm mifare1 card, Module Interface SPI Parameters. 10mbit / s.
BrandQunqi #ad
ManufacturerQunqi #ad
Part NumberMK-108-5

4. Stemedu

#ad

With Key Ring, with S50 Blank Card, for Arduino Raspberry Pi Nano NodeMCUPack of 2sets, RFID RC522 Module IC Card Reader Read RF Proximity Sensor

#ad
Stemedu #ad - Power voltage : 3. 3v, operating frequency: 13. 56mhz, data transfer rate: Maximum 10Mbit/s. Supported card types: compatible with mifare1 s50/S70, Compatible with MIFARE Ultralight/Mifare Proand MIFARE DESFire. What you will get: 2pcs rfid module, 2pcs blank Card, 2PCS Key Ring and 4PCS Pins. Document link: https://drive. Google. Com/file/d/1s3qrjpr1igysiP3IcB90huxeU1rsaYDp/view?usp=sharing. How to email us? please click “stemedu”you can find "Sold by Stemedu" under Buy Now button, in the new page, click “Ask a question” to email us.
BrandStemedu #ad
ManufacturerStemedu #ad
Part NumberST0565X2+ST0036

5. OSOYOO

#ad

OSOYOO RFID Security Master Starter Kit for Arduino UNO R3 Mega2560 Basic Learning DIY 18 Components Included

#ad
OSOYOO #ad - This rfid starter kit has 15 projects for beginners, and includes 18 types of electronic components. With this rfid starter kit, servo motors, how to use rfid system to do security checks, how the arduino controls and communicates with other devices such as LCDs, you can learn how RFID key and receiver works, LEDs, and keypads.

To help beginners use this rfid kit, we designed straight forward projects for each component. This is an osoyoo rfid 18-item starter kit, developed specifically for beginners who want to learn rfid diy projects with arduino UNO R3. This osoyoo rfid starter kit is a good place to start learning RFID. Every project has a circuit graph, sample code, and accompanying picture or video.

An example of rfid that we see in everyday life is an electronic door lock that enable a set of keys to unlock itself while blocking out other keys. Rfidradio-frequency identification is a technology that can be used to identify chips or tags that contains a piece of ID. The kit is a useful tool for teachers and students to do science fair project, science lab experiments and science club competitions.
BrandOSOYOO #ad
ManufacturerShenzhen Vership Co. LTD #ad
Height1.8 Inches
Length8.7 Inches
Width5.6 Inches
Part NumberDKAR100100
ModelLYSB01K6MO46C-ELECTRNCS

6. HiLetgo

#ad

Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi, HiLetgo RFID Kit

#ad
HiLetgo #ad - Easy to use, low cost, and applicable to equipment development and card reader development etc. The module can be directly loaded into the various reader molds. The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Applicable for the user who need to design or manufacture the RF card terminal.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-0490-A
ModelNA

7. DaFuRui

#ad

DaFuRui 5Pack RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring Compatible for Arduino

#ad
DaFuRui #ad - It is supported card types: mifare1 s50, mifare1 s70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire. This module can be directly loaded into the various reader molds. 100% brand new and high quality rC522 RFID RF IC Card Sensor Module. Applicable for the users who need to design or manufacture the RF card terminal. The development of access controls, electronic door locks or terminals for the time recording. This rfid-rc522 module is based on the philips mf522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips.
BrandDaFuRui #ad
ManufacturerDaFuRui #ad
Part NumberPFID

8. HiLetgo

#ad

Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi, HiLetgo 3pcs RFID Kit

#ad
HiLetgo #ad - The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Applicable for the user who need to design or manufacture the RF card terminal. Easy to use, low cost, and applicable to equipment development and card reader development etc. The module can be directly loaded into the various reader molds. The module use a voltage of 3. 3v, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-0490-3pcs

9. IZOKEE

#ad

IZOKEE RFID Kit, RC522 RF IC Reader Sensor Module with 5pcs Additional S50 Key Card as Gift and RFID Chip Key Ring for Arduino and Raspberry Pi

#ad
IZOKEE #ad - Rfid modulemodule uses voltage of 3. 3v, through the spi interface simple few lines can be directly connected to the user any CPU board communication module stable and reliable work, reader distance. Moreover, 5pcs extra s50 white card as Gift! Rc522 chipmf rc522 is applied to 13.

56mhz contactless communication highly integrated chip card reader. It is supported card types: MF S50, and MF DESFire. Wide range of applicationsit is applicable for the users who need to design or manufacture the RF card terminal, the development of access controls, electronic door locks or terminals for the time recording. Moreover, this module can be loaded directly into a variety of readers molds. Rfid modulemf522-an module adopts mfrc522 original reader circuit chip design, mf S70, easy to use, MF Pro, MF Ultralight, low cost.5

5 pcs extra s50 white cardthis rfid-rc522 module is based on the mf522-an board and is delivered together with an S50 card, key Ring and two matching pin strips. Support 14443A compatible transponder signals. Suitable for equipment development, for example, development of advanced applications such reader users, the need for RF card terminal design / production of the user. Two-way data transfer rates up to 424kbit / s.
BrandIZOKEE #ad
ManufacturerIZOKEE #ad

10. D-FLIFE

#ad

D-FLIFE 5pcs RFID Kit Mifare RC522 RFID Reader Module with S50 White Card and Key Ring for Arduino Raspberry Pi

#ad
D-FLIFE #ad - Applicable for the user who need to design or manufacture the RF card terminal. This module can be loaded directly into a variety of readers molds. Module interface: spi, Data transfer rate: Maximum 10Mbit/s. Rfid-rc522 module is based on the philips mf522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips. Power voltage : 3. 3v, operating frequency: 13. 56mhz.
BrandD-FLIFE #ad
ManufacturerD-FLIFE #ad
Part Number16316