Top 8 Nucleus Nano Mount – Camera Mounts & Clamps

As an Amazon Associate I earn from qualifying purchases.

1. SMALLRIG

#ad

SmallRig Nucleus-Nano Quick Release Mounting Clamp for Tilta Nucleus-Nano Hand Wheel – FAQ2323

#ad
SMALLRIG #ad - More security the adapter is anti-off designed to prevent the handwheel from accidentally sliding off. Multi-functional equipped with 1/4", smallrig qr clamp could be used for Ronin S via two m4 screws, 3/8" and m4 screws, for zhiyun crane2 via Mountng Clamp 2119, for Moza Air2 via Mounting plate 2319.

Compatible with g2x gimbal Could used with gimbal with M6 screw not included. Smallrig attachment plate 2323 is designed for helping nucleus-nato handwheel to attach on gimbals and any other camera equipment with 1/4”-20, 3/8”-16 and m4 threaded holes. Quick release design Features a quick release lever and installation mark for installation in few seconds.
BrandSMALLRIG #ad
ManufacturerSmallRig #ad
Part NumberFAQ2323-SR-01

2. Tilta

#ad

Or Cine-Style Lenses on Cage, Mirrorless, Tilta Nucleus-Nano Wireless Lens Control System for Most DSLR, Gimbal Like Ronin S

#ad
Tilta #ad - The wireless range of both the nano hand wheel Controller and Nano Motor is 300 feet! The motor has a 5-18v input tolerance for power via a micro usb port. The nano motor has its own built-in motor drive that communicates directly with the nano hand wheel controller.

Every motor has a 08 mod, which is the standard gear size for most cinema lenses. Compatible with most DSLR, Mirrorless, or Cine-style Lenses. Simply set the nano motor and Nano Hand Wheel Controller to the same channel and you will have full control. The nano motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller.

This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable sold separately. The torque of the Nucleus-Nano Motor at 5. 5v is 065nm and at 14. 8v is 1Nm. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Compatible with most DSLR, Mirrorless, or Cine-style Lenses.
BrandTilta #ad
ManufacturerTilta #ad
Part NumberWLC-T04
ModelWLC-T04-2

3. Tilta

#ad

Tilta Nucleus-Nano Hand Wheel 15mm Rod Adapter

#ad
Tilta #ad - Tilta nucleus-nano hand wheel 15mm Rod Adapter - Tightening Toggle - Tilta 2 Year Limited Warranty. Weight: 0168 lbs 008kg. Compatibility: Nucleus-Nano Hand Wheel. Materials: Aluminum-alloy, stainless steel.
BrandTilta #ad
ManufacturerTilta #ad
Height2.6 Inches
Length4.1 Inches
Weight0.25 Pounds
Width3.5 Inches
Part NumberWLC-T04-HWC-15
ModelAdapter

4. Tilta

#ad

Tiltamax Nucleus-Nano: Wireless Lens Control System — Wirelessly Control The Focus or Zoom of Most DSLR or Cine-Style Lenses | Compatible with Ronin S

#ad
Tilta #ad - The nucleus-nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. The nano motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. Fully compatible with Tilta's Nucleus-M motors & controllers + G2X gimbal. The nucleus-nano uses a brand new state of the art power-efficient miniature motor. Includes adapters for Ronin-S and Zhiyun Crane gimbals.
BrandTilta #ad
ManufacturerTilta #ad
Height3.2 Inches
Length7.5 Inches
Weight1.6 Pounds
Width7.5 Inches
Part NumberWLC-T04
ModelWLC-T04

5. Tilta

#ad

Tilta 18650 Power Supply Box WLC-T04-BP-18650 with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Motor

#ad
Tilta #ad - You can also power other accessories from these ports given they are within the correct voltage range. A small blue led next to the 5V USB port indicates that the power is active. A built-in 1/4″-20 mounting screw and two 1/4″-20 mounting holes allow you to mount the battery pack to your camera rig in a variety of ways. This dual battery pack allows you to use two 18650 batteries to power your Nucleus Nano motor via the 8V DC power output a DC to Micro USB cable is included or through the 5V USB port cable not included. Note: 18650 batteries are NOT included.
BrandTilta #ad
ManufacturerTilta #ad
Height0.9 Inches
Length3.5 Inches
Width1.5 Inches
Part NumberWLC-T04-BP-18650

6. Tilta

#ad

Tilta Nucleus-Nano with P-Tap Cable Wireless Focus Control System to Wirelessly Control The Focus of Most DSLR, Gimbal Such as Ronin S, Mirrorless, or Cine-Style Lenses on Cage

#ad
Tilta #ad - The nano motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller.

This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable sold separately. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. The 14. 8v output that p-tap ports provide give the motor a much higher torque than if powered through a 5V USB power cable. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.

The torque of the Nucleus-Nano Motor at 5. 5v is 065nm and at 14. 8v is 1Nm. Every motor has a 08 mod, which is the standard gear size for most cinema lenses. The nucleus-nano uses a brand new state of the art power-efficient miniature motor.
BrandTilta #ad
ManufacturerTilta #ad
Part NumberWLCT04-PTAP

7. SMALLRIG

#ad

Quick Release Clamp with 1/4" 3/8" M2.5 Thread for Cold Shoe Monitor Support Ball Head, 1885, SMALLRIG NATO Clamp

#ad
SMALLRIG #ad - Cold shoe adapterfeatures m2. 5 thread holes for smallRIG Cold Shoe Adapter 1241. For more accessoriesthe thread holes can be mounted with the articulating arm for the monitor or receiver. Nato clampquick release and attach to any NATO rail accessories. Mounting pointsthe nato clamp comes with many mounting holes on the top, such as the 1/4’’-20, 3/8’’-16, M2.5 threaded holes. Red locking leverthe red locking lever can help you tighten the NATO clamp and re-position in narrow spots where you’re not able to fully turn them.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.59 Inches
Length1.38 Inches
Weight0.07 Pounds
Width1.18 Inches
Part Number1885
Model1885

8. Tilta

#ad

Mirrorless, Tilta Nucleus-Nano Wireless Lens/Focus Control System to Wirelessly Control The Focus of Most DSLR, Gimbal Such As Ronin S, or Cine-Style Lenses on Cage

#ad
Tilta #ad - Every motor has a 08 mod, which is the standard gear size for most cinema lenses. The nano motor features low noise and high torque. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable sold separately.

The nano motor is also able to connect to the Nucleus-M’s FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. The wireless range of both the nano hand wheel Controller and Nano Motor is 300 feet! The nucleus-nano uses a brand new state of the art power-efficient miniature motor. Simply set the nano motor and Nano Hand Wheel Controller to the same channel and you will have full control.

The nano motor has its own built-in motor drive that communicates directly with the nano hand wheel controller. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. The motor has a 5-18v input tolerance for power via a micro usb port. The torque of the Nucleus-Nano Motor at 5. 5v is 065nm and at 14.
BrandTilta #ad
ManufacturerTilta #ad
Weight1.62 Pounds
Part NumberWLCT04