Top 9 Drop Ceiling Camera Mount – Camera Mounts & Clamps

As an Amazon Associate I earn from qualifying purchases.

1. ALZO digital


ALZO Suspended Drop Ceiling Upright Camera Mount

ALZO digital #ad - Includes x-clamp and pin for attachment to 1 inch wide drop ceiling frame and a safety line for added security. Alzo mini-ball camera Mount enables easy camera angle adjustment. Slotted holes in top and bottom of bracket allow for balance adjustment; comes with 2 plastic T-Bar hooks for attachment to frame for easy cable management. All aluminum bracket construction. Securly supports all DSLR cameras and small camcorders.
BrandALZO digital #ad
ManufacturerALZO Digital #ad
Height1 Inches
Length10 Inches
Weight1 Pounds
Width6 Inches
Part Number1928

2. Panavise


Panavise 863W CCTV T-Bar Ceiling Clip Base Cream

Panavise #ad - Country of Origin:United States. Package height:1. 0". Package width:1. 0". Package length:1. 0".
BrandPanavise #ad
ManufacturerPanavise #ad
Height0.87 Inches
Length1.5 Inches
Weight0.1 Pounds
Width1.5 Inches
Part Number863W
WarrantyLimited LIFETIME Warranty!

3. ALZO digital


ALZO Telescoping Suspended Drop Ceiling Mount Kit

ALZO digital #ad - Suspended ceiling frame clip for 1-inch T-Bar metal frame. 4 section adjustable height aluminum support with a max capacity of 12 pounds. 2 plastic t-Bar hooks for power cord management. Includes nylon safety line for attachment of the light fixture to the true ceiling framing; includes an installation guide see link below under "Technical Specification". Collapsed length is 19 inches, maximum extended length is 58 inches.
BrandALZO digital #ad
ManufacturerALZO Digital #ad
Height3 Inches
Length24 Inches
Width4 Inches
Part Number1138

4. VideoSecu


VideoSecu One Height Adjustable 2"-6" Camera Wall Ceiling Mount Bracket for CCTV CCD Box Body Camera Pan Tilt Bracket 1A2

VideoSecu #ad - Metal construction; All parts interchangeable. Videosecu camera mount. 1/4in / 20 threads throughout. Please report to Amazon if the mount you received does not bear VideoSecu logo. 12 different combinations, 90 degree tilt; 360 degree turn and rotation. Customize to 2", 4" or 6" length. T-bar drop ceiling clip included.
BrandVideoSecu #ad
ManufacturerVideoSecu #ad
Height2 Inches
Length6.2 Inches
Width2.7 Inches
Part NumberMCB1W

5. VideoSecu


VideoSecu 24-40 Inch Adjustable Tilt Swivel Bracket Long Drop Ceiling Mount Stand for CCTV Security Camera Housing Home Surveillance System 1P4

VideoSecu #ad - Loading capacity 8 lb. Ceiling mount bracket stand for security camera. Aluminum alloy construction, light weight, heavy duty. Adjustable length from 24 to 40 inch. Tilt 90 degrees, swivel 360 degrees. Cable management through extension pole.
BrandVideoSecu #ad
ManufacturerVideoSecu #ad
Weight2 Pounds
Part Number1P4

6. Panavise


Panavise 845-246W Deluxe Micro Mount Cream

Panavise #ad - Modular system: Base, Shaft and Head screw together. Country of Origin: China. Fully adjustable at the camera 190° Tilt, 360° Turn & 360° Rotation. Matching vinyl cover adds a finished look! Includes 2-inch 508 mm round base with four 0188-inch 4.

8mm holes on 1. 6-inch 406mm bolt circle for solid surface mounting, and a T-Bar Clip for drop ceiling rails. Solid steel shafts 05-inch 12. 7mm diameter will make a 2-inch 508mm, 4-inch 101. 6mm or 6-inch 152. 4mm long mount. Modular system: base, Shaft And Head Screw Together. Fully adjustable at the camera 190 degreesTilt, 360 degreesTurn & 360 degreesRotation. Knob and tamper-resistant set-screw adjusting options included. 1/4-20 stud with lockring. 1/4-20 stud with Lock Ring. Solid steel shafts 05" 12. 7mm diameter will make a 2" 50
BrandPanavise #ad
ManufacturerPanaVise #ad
Height2.25 Inches
Length4 Inches
Weight0.07 Pounds
Width3.25 Inches
Part Number845-246W
WarrantyLimited Lifetime

7. ALZO digital


ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

ALZO digital #ad - Using the included support wire will provide for a very safe install. We recommend using a remote control where possible. Easy to install on a suspended drop ceiling with a 1-inch wide t-bar frame, and accessory 8-inch extension rods can be added to lower the projector.

Projector is not included; it is shown for demonstration purposes only. Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole. With the typical drop ceiling, with 25 degrees pitch; projector drop from the ceiling is 10 inches, a medium to heavy projector a small amount of movement or sway will occur when touching the projector.

Includes an american writtEN installation manual with illustrations and photos. Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, Optoma, Benq, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Viewsonic and most other projectors.
BrandALZO digital #ad
ManufacturerALZO Digital #ad
Height2.2 Inches
Length10.7 Inches
Width4.2 Inches
Part Number1809

8. ALZO digital


ALZO Suspended Drop Ceiling Camera Mount

ALZO digital #ad - Attaches to 1-inch wide common T-Bar style suspended frame. All metal, durable solution for hanging DSLRs and other small cameras from a suspended drop ceiling. Includes a metal mini-ball mount to allow for camera angle control. May require additional wires to connect the T-bar frame to the true ceiling for added stability. Includes 2 t-bar hooks to support wires connecting to the camera.
BrandALZO digital #ad
ManufacturerALZO Digital #ad
Height1.5 Inches
Length8.6 Inches
Weight0.4 Pounds
Width5.9 Inches
Part Number1922

9. Cevoqin


Wall Camera Mount Desk Camera Mount, Max Length 27in/68cm, Photography Drop Ceiling Camera Mount for Studio Softbox Video Strobe Flash Ring Light Stand, Photography Ceiling Mount Camera Ceiling Mount

Cevoqin #ad - That can be mount vertically or horizontally to meet your needs. You can also find a stud and use 1 1/2 Wood screws or toogle bolts if you cannot find the stud. Making it strong for heavy duty work Hold your lights to the ceiling or wall, makes your studio look professional.

Aluminium alloy materialthe wall mounting boom arm is made of high-quality Aluminium Alloy material, Lightweight, sturdy and secure and stronger corrosion-resistant. What you can get1 x ceiling mount stand only. Length adjustablethe ring light wall mount boom arm is designed to extend length from 17-27 in / 43-68 cm, Max Loaded up to 10kg. Of course, others are not included, if you have any question, you can contact me. We will give you help within 24 hours.

Highly recommendation it can be fixed on a solid wall, and its height is adjustable, extending up to 21. 6", and you can adjust its height to meet your needs. Ceiling mount with practical useit comes with 3/8" & 1/4" stud: this wall boom arm light stand is perfect for mounting equipment on wall, softbox, studio work light, monolights, reflectors, like Photo video strobe lights, umbrellas, desk and ceiling, flash, DSLR Camera and more.
BrandCevoqin #ad
ManufacturerCevoqin #ad
Height2.49 Inches
Length13 Inches
Width3.89 Inches
Part NumberCeiling Mount