Top 9 Guy Wire Clamp – Two-Way Radio Antennas

As an Amazon Associate I earn from qualifying purchases.

1. Easy-Up

#ad

Heavy Duty, EZ 43-A Adjustable 3 Way Down Guy Ring for up to 2-1/4" Mast

#ad
Easy-Up #ad - Back out bolts to accept masts up to 1-1/4", for larger masts loosen eyebolts on sides to expand ring. Adjustable mount down guy ring for 3-way guying of antenna masts up to 2-1/4" od. Made in the usa. Uses 3 screw eye bolts to attach guy wire. Heavy duty steel design.
BrandEasy-Up #ad
ManufacturerEasy Up #ad
Part NumberEZ 43-A
ModelEZ 43A

2. ROHN

#ad

ROHN Guy Ring and Clamp Assembly for up to 2" Antenna Masts, 2.00"

#ad
ROHN #ad - Adjust guy wires until antenna mast is vertical. Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire.

Rohn 2" guy ring & mast Clamp Assembly. Pre-galvanized Steel. Attaches guy wire to your antenna mast up to 2. 00" od. 1 2. 00" guy ring rohn part number gr4 / 1 2. 00" mast clamp & bolt assembly ROHN Part Number C4A. Guy wire ring should rotate freely on the mast for easy manipulation. Genuine rohn hardware. Installation instructions: slip rohn clamp assembly and rohn guy ring over the antenna mast. Oem factory Hardware. Guy ring will rest on top of clamp assembly. Tighten bolt on clamp assembly to fasten to your mast.
BrandROHN #ad
ManufacturerROHN #ad
Weight1 Pounds
Part NumberC4A GR4
ModelC4A GR4

3. PHAT SATELLITE INTL

#ad

Q-Span Clamp, Mid Span Aerial Drop Cable Suspension Clamp with Hook and Hex Nut 20 Pack, Galvanized Steel

#ad
PHAT SATELLITE INTL #ad - Used for mid-span drop wire take-offs. Constructed of High Quality galvanized steel. 20 pieces. Designed for 1/4" to 7/16" messenger wire strand. Will hold cable away from obstacles in the line of aerial construction.
BrandPHAT SATELLITE INTL #ad
ManufacturerPHAT SATELLITE INTL #ad
Weight1 Pounds

4. Easy-Up

#ad

Down Guy Wire Kit for up to 2-1/4" Mast

#ad
Easy-Up #ad - Note: the manufacturer does not provide instructions with this item. Includes: 50' 6/20 plastic-coated guy wire, 3 turnbuckles, guy wire ring, 3 s hooks, 6 tiller CLAMPS. See downloadable document below. Mast not included. Proudly made in the usa. Adjustable guy ring is for antenna masts up to 2-1/4" od. Heavy duty steel design.
BrandEasy-Up #ad
ManufacturerEasy Up #ad
Weight4 Pounds
Part NumberEZ GW-KIT
ModelEZ GW-KIT

5. ROHN

#ad

1.25", ROHN Guy Ring and Clamp Assembly for up to 1-1/4" Antenna Masts

#ad
ROHN #ad - Attaches guy wire to your antenna mast up to 1-1/4" OD. Tighten bolt on clamp assembly to fasten to your mast. Rohn 1-1/4" guy ring & mast Clamp Assembly.

Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire. Guy ring will rest on top of clamp assembly. Genuine rohn hardware. 1 1. 25" guy ring rohn part number gr1 / 1 1. 25" mast clamp & bolt assembly ROHN Part Number C1A. Oem factory Hardware. Adjust guy wires until antenna mast is vertical. Installation instructions: slip rohn clamp assembly and rohn guy ring over the antenna mast. Guy wire ring should rotate freely on the mast for easy manipulation. Pre-galvanized Steel.
BrandROHN #ad
ManufacturerROHN #ad
Weight1 Pounds
Part NumberC1A GR1
ModelC1A GR1

6. ROHN

#ad

ROHN Guy Ring and Clamp Assembly for up to 1-1/2" Antenna Masts, 1.50"

#ad
ROHN #ad - Guy ring will rest on top of clamp assembly. Rohn 1-1/2" guy ring & mast Clamp Assembly. 1 1. 50" guy ring rohn part number gr2 / 1 1. 50" mast clamp & bolt assembly ROHN Part Number C2A.

Attaches guy wire to your antenna mast up to 1-1/2" OD. Genuine rohn hardware. Oem factory Hardware. Tighten bolt on clamp assembly to fasten to your mast. Guy wire ring should rotate freely on the mast for easy manipulation. Pre-galvanized Steel. Adjust guy wires until antenna mast is vertical. Installation instructions: slip rohn clamp assembly and rohn guy ring over the antenna mast. Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire.
BrandROHN #ad
ManufacturerROHN #ad
Weight1 Pounds
Part NumberC2A GR2
ModelC2A GR2

7. ROHN

#ad

ROHN Guy Ring and Clamp Assembly for up to 1-3/4" Antenna Masts, 1.75"

#ad
ROHN #ad - Tighten bolt on clamp assembly to fasten to your mast. Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire.

Adjust guy wires until antenna mast is vertical. Attaches guy wire to your antenna mast up to 1-3/4" OD. Installation instructions: slip rohn clamp assembly and rohn guy ring over the antenna mast. Genuine rohn hardware. Guy ring will rest on top of clamp assembly. Guy wire ring should rotate freely on the mast for easy manipulation. Pre-galvanized Steel. Oem factory Hardware. Rohn 1-3/4" guy ring & mast Clamp Assembly. 1 1. 75" guy ring rohn part number gr3 / 1 1. 75" mast clamp & bolt assembly ROHN Part Number C3A.
BrandROHN #ad
ManufacturerROHN #ad
Weight1 Pounds
Part NumberC3A GR3
ModelC3A GR3

8. Rustark

#ad

Rustark 50Pcs 2 Sizes Adjustable Self-Adhesive Nylon Cable Straps Cable Ties Cord Clamp for Wire Management, Large and Small

#ad
Rustark #ad - It could be a great helper and a good gift for any cable users in the family and office. The wire holders are easy to use and remove. It can be adhered any surface quickly, and can be removed without any damage and residues. Nylon material: made of high-quality material nylon, wear resistance, good toughness, durable, high tensile strength, heat resistance, practical, non-toxic and odorless.

Every size have 25 pieces. Wide application: the cord management system can work for power cords, car, festive lights, USB cords, network cables, charging cables, and more. To help you to save space and clean up messy wires off the floor or desk with afforable price. No any other tools required. Black cable ties with adjustable design, if the self-adhesive pad lose their effectiveness, because the items with built-in small holes, can meet your different needs.

Adjustable & recyclable: zipper design, so you can opens and closes easily and quickly to add or remove cables according to your wire size. It has high mechanical strength, corrosion resistance. Self-adhesive: self-adhesive pads can be good and long lasting for any flat surfaces, wood, such as plastic, rubber, metal, glass, etc. Although the adhesion of self-adhesive pad is very strong, you can also use screws to fix the cable ties, can be recycled. High-value set: packing includes two different size, large and small.
BrandRustark #ad
ManufacturerRustark #ad
Part NumberCT-21
Model8541757058

9. EBOOT

#ad

Black, eBoot Adjustable Cable Clips Adhesive Nylon Wire Clamps, 50 Pack

#ad
EBOOT #ad - Pack of 50 adjustable cable clips; Can be utilized in car, office and home. Base size: 25 x 19 x 2. 2 mm. Material: nylon; Color: black. Fit for cable diameter: 10 mm/ 04 inch maximum; Suitable for most size wires. Adhesive adjustable cable clips, keep your cables organized.
BrandEBOOT #ad
ManufacturereBoot #ad
Part NumberEBOOT-CABLE-TIES-06
Model.