As an Amazon Associate I earn from qualifying purchases.
Superbat #ad - Joint properties: impedance： 50 ohm | body material： Brass | Body Plating： Nickel | Attachment Method： Crimp. Pl259 connectors works great for rg214 rg213 9913 RG8 LMR400 Coax Cable. Never worry about any security problems.
Assembled by mpd digital, a dod supplier - in a GA Facility using MILSPEC Components. Warranty: this is a genuine u. S. A made times microwave tm product, providing the best signal in RF Coaxial Cables since 1948.
Like all lmr cables the pe Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources. Limited 1 year Warranty. Ultra low loss & flexibility: this low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required; Ensures maximum performance for your antenna installation.
MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad - Cable type: genuine times microwave lmr-400 coaxial cable. Flexible jacket: flexible uv proof pvc jacket, outer diameter. 405 inches 103mm nom. Srl, per mil-c-18. Connects access points, rotary antenna assemblies, receivers, scanners, meters, WiFi hotspots, GPS systems, wireless internet routers and radio transmitters to antennas.
Uses: to connect miner to antenna/arrester. Designed for 20 year outdoor or indoor applications and the outer jacket resists ultraviolet light and oxidation. Peoples network: compatible with helium and iot hotspot antennas and devices designed for low power wide area networks LPWANs or LoRaWAN from 868-869 MHz and 902-930 MHz also known as EU868 Frequency Plan and US915 Frequency Plan.
Connector type: mpd digital n type female to rp-sma male coax connectors. Uhf/vhf wifi up to 6 GHz. Ultra low loss: this low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required. For best results and low loss, we recommend using cable lengths up to 75 ft. Direct drop-in replacement for RG-8/9913 and other UF designated Cables of this size variant.
Custom Cable Connection #ad - Most lmr connectors employ crimp outer attachment using standard hex crimp sizes. 180 db between two adjacent cables. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. B>uhf pl259 male connectors: this cable is assembled with 2 male uhf pl259 connectors a wide variety of connectors are available for LMR-400 cable, reverse polarity, including all common interface types, and a choice of solder or non-solder center pins.
The pe jacket used on LMR-400 makes it able to stand abrasion.
Times microwave lmr400: is drop-in replacement for rg-8/9913 air-dielectric type cable jumper assemblies in wireless Communications Systems Short Antenna Feeder runs Any application e. G. B>rf shielding: is 50 db greater than typical single shielded coax 40 dB. Wll, scada, gps, wisp, mobile antennas requiring an easily routed, WiMax, WLAN, LMR, low loss RF cable. B>low loss: is another hallmark feature of lmr-400 B>flexibility and bendability: are hallmarks of the lmr- 400 cable design.
Riotaxy #ad - 4. Ideal for build or repair coaxial cables, use this uhf male connector to create your own uhf cable which is widely used in Wireless Communications Systems, WLAN, Short Antenna Feeder runs or any other application e.
G. 3. Pl259 coax connectors works great for 50 ohm low loss rg8 rg214 rg213 9913 LMR400 Type Coax Cable, strong vibration resistance, High reliability, good mechanical and electrical performance.1
5. The material of all metal parts are made of brass copper, premium quality UHF plug connector, Package Include:5pcs pl259 connector. 2. Pl-259 coax connectors suitable for Radio equipment and instrument, and ground transmission system, Teflon for Ham Radio. Wll, scada, wimax, gps, wisp, lmr, mobile Antennas. Top diY solution.
Custom Cable Connection #ad - Lmr-400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HF/UHF/VHF installation up to 250 feet. The pe jacket used on LMR-400 makes it able to stand abrasion. Times microwave lmr400: is drop-in replacement for rg-8/9913 air-dielectric type cable jumper assemblies in wireless Communications Systems Short Antenna Feeder runs Any application e.
G. Wll, gps, scada, wimax, lmr, mobile antennas requiring an easily routed, WLAN, WISP, low loss RF cable. The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB i.
Most lmr connectors employ crimp outer attachment using standard hex crimp sizes. B>uhf pl259 male connectors: this cable is assembled with 2 male uhf pl259 connectors a wide variety of connectors are available for LMR-400 cable, reverse polarity, including all common interface types, and a choice of solder or non-solder center pins. B>rf shielding: is 50 db greater than typical single shielded coax 40 dB. Size for size lmr has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
Custom Cable Connection #ad - B>low loss: is another hallmark feature of lmr-400 Bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables. B>flexibility and bendability:are hallmarks of the lmr- 400 cable design. 180 db between two adjacent cables.
Size for size lmr has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables. The pe jacket used on LMR-400 makes it able to stand abrasion. Lmr-400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HF/UHF/VHF installation up to 250 feet.
B>connectors: a wide variety of connectors are available for lmr-400 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. B>rf shielding:is 50 db greater than typical single shielded coax 40 dB. B>times microwave lmr standard: is a uv resistant polyethylene jacketed cable designed for outdoor exposure. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
Eightwood #ad - Package includes: 1pc n male rg400 cable | Each cable is cut by machine and made by manual, they will be tested 3 times prior to shipment.
Extension cable length: 100cm/ 3 feet, heat shrink on both ends. Works for 50 ohm rf application with n type connection, extenders, routers, including 4G LTE/WiFi/Ham radio antennas, etc.
1. Superbat
#adWlaniot PL-259 Connectors Crimp PL 259 UHF Male Plug RF Coaxial Connector for LMR400 9913 RG214 RG213 Coax Cable 5Pcs
#adMore information #ad
We are confident in the quality of our connector and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. Type: uhf male pl259 crimp coax Connectors Adapter RF Connector. Package include: 5 Pcs PL-259 Coax Connectors. If you unfortunately get a defective one, please contact our customer support.| Brand | Superbat #ad |
| Manufacturer | wlaniot #ad |
| Part Number | GP-CO-UHF-02 |
| Model | 8541674977 |
More information #ad
2. MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY
#adMPD Digital LMR400-N-male-to-N-male-75ft Ham Radio Antenna Cable LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss LMR400
#adMPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad - Outer jacket material: flexible indoor/outdoor uv proof fr-pe, outer diameter:. 400 103mm nom. Srl: per mil-c-17/74. Lmr400 cable type: a registered trademark of times microwave systems; lmr-400 Coaxial cable is a direct drop-in replacement for RG-8/9913.Assembled by mpd digital, a dod supplier - in a GA Facility using MILSPEC Components. Warranty: this is a genuine u. S. A made times microwave tm product, providing the best signal in RF Coaxial Cables since 1948.
More information #ad
This cable connects antennas, Meters, Receivers, Radio transmitters and other applicable RF Sources. Connector types: n type male to n type male; HF/VHF/UHF ; DC up to 6 GHz. Like all lmr cables the pe Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources. Limited 1 year Warranty. Ultra low loss & flexibility: this low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required; Ensures maximum performance for your antenna installation.
| Brand | MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad |
| Manufacturer | MPD Digital #ad |
| Height | 3.2 Inches |
| Length | 11.6 Inches |
| Weight | 5.4 Pounds |
| Width | 11.8 Inches |
| Part Number | LMR400-N-male-to-N-male-75ft |
| Model | LMR400-N-male-to-N-male-75ft |
More information #ad
3. MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY
#adWiFi, MPD Digital Genuine Times Microwave LMR-400 LMR400 RF Coaxial Cable with N Female and RP-SMA Male Connectors for Hotspot, Antenna, 1.5ft, Radio Transmitters
#adUses: to connect miner to antenna/arrester. Designed for 20 year outdoor or indoor applications and the outer jacket resists ultraviolet light and oxidation. Peoples network: compatible with helium and iot hotspot antennas and devices designed for low power wide area networks LPWANs or LoRaWAN from 868-869 MHz and 902-930 MHz also known as EU868 Frequency Plan and US915 Frequency Plan.
More information #ad
Cable assemblies used for mining cryptocurrency such as HNT, Bitcoin, Litecoin, etc. Bends and handles significantly better than air-dielectric / corrugated PE hardline cables. Connector type: mpd digital n type female to rp-sma male coax connectors. Uhf/vhf wifi up to 6 GHz. Ultra low loss: this low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required. For best results and low loss, we recommend using cable lengths up to 75 ft. Direct drop-in replacement for RG-8/9913 and other UF designated Cables of this size variant.
| Brand | MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad |
| Manufacturer | MPD Digital #ad |
| Part Number | Nm-RPSMAm-LMR400-6ft |
| Model | Nm-RPSMAm-LMR400-6ft |
More information #ad
4. Custom Cable Connection
#adCB Radio and WiFi Antenna Feeders, WLAN, Custom Cable Connection 200 Foot UHF PL259 Male to UHF PL259 Male LMR400 Times Microwave 50 Ohm Coax Low Loss Antenna Cable for Ham Radio
#adThe pe jacket used on LMR-400 makes it able to stand abrasion.
More information #ad
Size for size lmr has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables. Lmr-400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HF/UHF/VHF installation up to 250 feet. Times microwave lmr400: is drop-in replacement for rg-8/9913 air-dielectric type cable jumper assemblies in wireless Communications Systems Short Antenna Feeder runs Any application e. G. B>rf shielding: is 50 db greater than typical single shielded coax 40 dB. Wll, scada, gps, wisp, mobile antennas requiring an easily routed, WiMax, WLAN, LMR, low loss RF cable. B>low loss: is another hallmark feature of lmr-400 B>flexibility and bendability: are hallmarks of the lmr- 400 cable design.
| Brand | Custom Cable Connection #ad |
| Manufacturer | Custom Cable Connection #ad |
| Part Number | 110224-200C |
More information #ad
5. by W5SWL
#adW5SWL Brand Premium Series TNC Male Crimp Coax Connector fits LMR400 Type Cable 2-Pack
#adby W5SWL #ad - Impedance: 50 Ohms. Fits type 400 Coax Series Cable. Delrin insulator, gold Plated RF Pin, Nickle Plated Body. Tnc male crimp Connector.More information #ad
| Brand | by W5SWL #ad |
| Manufacturer | W5SWL #ad |
| Weight | 0.08 Pounds |
| Part Number | 721405421794 |
| Model | 721405421794 |
More information #ad
6. Riotaxy
#adRiotaxy UHF PL-259 PL259 Male-Plug Solder Coax Connector Adapter RF Connector Silver/Teflon for RG8 RG214 RG213 9913 LMR400 Type Coax Cable Compatiable with CB Ham Radio Antenna Pack of 5
#adG. 3. Pl259 coax connectors works great for 50 ohm low loss rg8 rg214 rg213 9913 LMR400 Type Coax Cable, strong vibration resistance, High reliability, good mechanical and electrical performance.1
More information #ad
1. Uhf male solder pl259 connectors, insulator ptFETeflon, Pin Silver plated, Body brass Nickel plated, withstand high temperature when soldering and will not Melt.55. The material of all metal parts are made of brass copper, premium quality UHF plug connector, Package Include:5pcs pl259 connector. 2. Pl-259 coax connectors suitable for Radio equipment and instrument, and ground transmission system, Teflon for Ham Radio. Wll, scada, wimax, gps, wisp, lmr, mobile Antennas. Top diY solution.
| Brand | Riotaxy #ad |
| Manufacturer | rf-sodo #ad |
| Height | 0.6 Inches |
| Length | 1.42 Inches |
| Weight | 0 Pounds |
| Width | 0.75 Inches |
| Part Number | UHF-J7-5 |
| Model | UHF-J7-5 |
More information #ad
7. Custom Cable Connection
#adCB Radio and WiFi Antenna Feeders, Custom Cable Connection 75 Foot UHF PL259 Male to UHF PL259 Male LMR400 Times Microwave 50 Ohm Coax Low Loss Antenna Cable for Ham Radio, WLAN
#adG. Wll, gps, scada, wimax, lmr, mobile antennas requiring an easily routed, WLAN, WISP, low loss RF cable. The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB i.
More information #ad
E. B>low loss: is another hallmark feature of lmr-400180 db between two adjacent cables. B>flexibility and bendability: are hallmarks of the lmr- 400 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. Most lmr connectors employ crimp outer attachment using standard hex crimp sizes. B>uhf pl259 male connectors: this cable is assembled with 2 male uhf pl259 connectors a wide variety of connectors are available for LMR-400 cable, reverse polarity, including all common interface types, and a choice of solder or non-solder center pins. B>rf shielding: is 50 db greater than typical single shielded coax 40 dB. Size for size lmr has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
| Brand | Custom Cable Connection #ad |
| Manufacturer | Custom Cable Connection #ad |
| Part Number | 110224-75C |
More information #ad
8. Custom Cable Connection
#adCB Radio and WiFi Antenna Feeders, Custom Cable Connection 150 Foot N Male to N Male LMR400 Times Microwave 50 Ohm Coax Low Loss Antenna Cable for Ham Radio, WLAN
#adSize for size lmr has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables. The pe jacket used on LMR-400 makes it able to stand abrasion. Lmr-400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HF/UHF/VHF installation up to 250 feet.
More information #ad
Most lmr connectors employ crimp outer attachment using standard hex crimp sizes. This cable is made with N Male connectors. By incorporating the best materials for UV resistance these cables have an outdoor life expectancy in excess of 20 years. B>connectors: a wide variety of connectors are available for lmr-400 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. B>rf shielding:is 50 db greater than typical single shielded coax 40 dB. B>times microwave lmr standard: is a uv resistant polyethylene jacketed cable designed for outdoor exposure. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
| Brand | Custom Cable Connection #ad |
| Manufacturer | Custom Cable Connection #ad |
| Weight | 12.5 Pounds |
| Part Number | 103555-150C |
More information #ad
9. Eightwood
#adAntenna Router, Ham Radio, Eightwood N Male to N Male Jumper RG400 Low Loss Coaxial Cable 3 Feet for 4G LTE Antenna,WiFi Antenna
#adExtension cable length: 100cm/ 3 feet, heat shrink on both ends. Works for 50 ohm rf application with n type connection, extenders, routers, including 4G LTE/WiFi/Ham radio antennas, etc.
More information #ad
Low loss rg-400 coax: with double shield and a heavy stranded inner conductor, this RG400 cable supports interrupted transfer of signals from devices with minimum signal loss. Connector: 50 ohm n male connector on both assembly sides; Connector material: nickel-plated brass.| Brand | Eightwood #ad |
| Manufacturer | Eightwood #ad |
| Part Number | EWUJ0176 |
| Model | EWUJ0176 |
More information #ad
